 sales@drjscientific.com      0086-18352836805
You are here: Home / Products / Hide / Vacuum Emission Metal Spectrometer for Metal Analysis

Product Category

Contact Us

Hot-Selling Products

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Vacuum Emission Metal Spectrometer for Metal Analysis

CMOS-based, spark discharge, metal detection

Ultra-low limits of detection

High integration, reliability, stability

Energy saving 50%, material saving

Lowing operating cost

Small size, light weight, easy to move and install

Mobile APP control

Standardized parameter modification

Availability:
Quantity:

Summary:

W5 Vacuum Emission Metal Spectrometer bring in the advanced technology from Europe. It is the 4th generation Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the W5 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.



Application:

W5 Optical Emission Spectrometer(spark OES) is used for applications in metal elemental analysis, trace element analysis for science and industry like Metallurgy, Foundry, Mechanical Engineering, Scientific Research, Product Inspection, Automobile, Petrochemical Engineering, Shipbuilding, Electrics, Aerospace, Nuclear Power, Metallic and Nonferrous Metallic Smelting, Processing and Recycling. It is including full element analysis range, but at same time the element analysis amount can be bespoke.



Large Steel Plants Where needs are at around10 PPM levels or elements like C, N, Cr, S, P etc.

Testing Laboratories: Commercial testing laboratories, Universities and colleges

Pure metal applications purity Al, Pb, Zn, Mg etc. – most industrial users

Regulatory compliance Very low LODs to control Pb, Cd, As etc.

Foundries which need a quick analysis near the furnace

Manufacturing Facilities

Warehouse material identification

Base: Fe, Cu, Al, Ni, Co, Mg, Ti, Zn, Pb, Sn, Ag, Mn, Cr etc



Detection Matrices:

Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)

Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)

Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)

Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)

Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)

Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)

Titanium(Ti) and its alloys

Zinc(Zn) and its alloys

Lead(Pb) and its alloys

Tin(Sn) and its alloys

Argentum(Ag) and its alloys

Manganese(Mn) and its alloys

Chrome(Cr) and its alloys

Small sample, special size sample and wire detection


Parameter

Item

Index

Optical system

Optical structure

The Paschen Runge construction full vacuum type optics system

Room temperature

35℃±0.5℃

Wavelength range

130-800nm

Focal length

400mm

Grating line

2400m1/mm

First order spectral line dispersion rare

1.2nm/mm

Detector

Multi block high performance linear CMOS array

Average resolution ratio

10pm/pixel

Excitation table

Gas

Rushing argon(99.999%)

Argon flow rate

When excited: 3-5L/min

Standby time: no need for standby traffic

Electrode

Tungsten electrode technology

Purge

Automatic purge function

Make up

Thermal deformation self-compensation design

Analyze the gap

Sample stage:3.4 mm

Excitation light

Type

HEPS

Frequency

100-1000HZ

Discharge current

1-400A

Special technology

Optimization of discharge parameters design

Pre -combustion

High-energy pre-combustion technology

Processor

High end ARM, high-speed data synchronization acquisition and processing

Data collection system

Interface

Ethernet data transmission based on DM9000A

Power

220VAC 50/60Hz(Customized)

Others

Base

Fe, Cu, Al, Ni, Co, Mg, Ti, Zn, Pb, Sn, Ag, Mn, Cr etc

Power consumption

Maximum:750W standby:40W

Working temperature

10-35℃(temperature ≥5°C)

Working humidity

20-85%

Dimension

860mm(L)*680mm(W)*438mm(H)

Weight

About 100Kg



Previous: 
Next: 
Chemical, physical and structural,
cleanliness analysis solution supplier
Nowadays we help users better understand a wide variety of materials, from polymers and mining to metals and from electronic chip to component.

QUICK LINK

PRODUCTS

CONTACT
  0086-18352836805
  sales@drjscientific.com
 0086-18352836805
 No. 35 Jingsheng Rd., Huishan District, Wuxi City, Jiangsu Province, China.
Copyright © 2021 Dr.J Scientific